The device is RFID Access Controller with WiFi-enabled Intercom. People can install the APP for intercom with their smart phone,
It's integrated with Tuya which supports 500 mobile users and 1000 local users.
Model:
Vcontrol 2Brand:
S4AProduct Parameter | Parameter Descr1ption |
S4A Model | Vcontrol 2 |
Product Name | WIFI Video Intercom Access |
Video Intercom | |
Network | 2.4G WiFi connection |
Pixel | 2.0Mpx (1080P) |
Visual Angle | Horizontal 140° wide angle |
Night Vision | IR-CUT (Colorful at daytime, black and white at night) |
Extended Memory | TF card with unlimited capacity |
Intercom | Full duplex voice intercom |
Other Functions | Motion detection; Playback; Take picture/video; Unlock remotely |
Access Control | |
User Capacity | 1000 |
Common User | 988 |
Visitor User | 10 |
Panic User | 2 |
PIN Length | 4~6 digits |
Proximity Card Reader | EM or Mifare |
Radio Technlogy | 125KHz/13.56MHz |
Read Range | 2~6cm |
Wiring Connections | Relay output, exit button, alarm, door contact, Wiegand input/output |
Relay | One (NO, NC, Common) |
Adjustable Relay Output Time | 0~99 Seconds (5 seconds default) |
Lock Output Load | 2 Amp Maximum |
Wiegand Interface | EM card version: Wiegand 26~44 bits input & output (Factory default: Wiegand 26bits) |
Mifare card version:Wiegand 26~44 bits input & output (Factory default: Wiegand 34bits) | |
PIN Output | 4 bits,8bits (asc11),10 digits Virtual Number(Factory default:4bits) |
Electric | |
Operating Voltage | DC 12V |
Idle Current | ≤ 150mA |
Active Current | ≤ 250mA |