Deal the same number for WG data
1) connect the pc and reader use the serial port, and use the “RFIDDemo.exe”;
2) switch to “BASE SETTINGS”, and set the parameters;
3) switch to “READ DEMO”, and swipe same tag;
4) select value for the drop-down list , if the red frame show the same in every value, the you have to rewriting the tag numbers, Reference write card description document;
If you confirm the value is your right value, please mark this value, switch to “BASE SETTINGS”, and set the “Byte Offset”;
(the value default is 0,5,9,1,4,8)
5) now ,the set is over, connect the controller test again.